Aldilla ROGUE info specs and pictures. TOUR limited version!

[joey3108]

[quote name='ram01002' timestamp='1411575292' post='10175449']
Joe - 107 mph, quick transition. Ok to go 60x untipped?

Thanks.
[/quote] hmmm, depends on your complete specs and what you used to before. I have a feeling you would need a S flex tipped 1"- 1.5" to bring the torque lower to accommodate your quick tempo/heavy load at 45" D2sw but you might be ok with straight in x if you play it shorter and/heavier sw.

[ram01002]

Thanks for the info Joe! Typically play driver at d4, 44.5", coming from an untipped Kai'li 60x. I'm thinking I can get away with 60x in the Rogue.

[joey3108]

Looky looky

[boycer]

Finally got to hit my rogue 60 stiff 125msi in a g30 head. Because of reviews on this shaft I went with the 12 SFTec head.

I will start by saying this shaft feels great to me, this combo is really straight, but to my surprise it was a little high. I started with it in the +1 position and lowered it to stock. Probably should have tried going even lower.

I only played 9 holes and hit the cobra bio cell std with red tie and the g30 rogue on every hole. Cobra was probably just as long but the g30 seemed a little straighter.

Might have to pick up a g30 10* head or driver to try out in the rogue. Think that should be an awesome combo. It felt awesome and was straight tough.

[ram01002]

I've got 2 rounds in with Rogue 125 MSI 60x . . . call me crazy, but if you blindfolded me I wouldn't be able to tell the difference between this shaft and RIP Alpha. RIP Alpha is probably my favorite driver shaft ever, so that isn't a bad thing for me. I would say the feel is fairly stout without the "smooth kick" some prefer out of shafts like the DI series. I like the firmer "no-hinge" type feel of this. Just my take, fwiw.

[tyorke1]

joey, i hooked the 60x , would i be better off with the 60 stiff tipped, my ss is 107-110 but quick tran

[tyorke1]

whats the comparison with pros playing the black and the silver

[JR Van]

[quote name='tyorke1' timestamp='1412895978' post='10262753']
joey, i hooked the 60x , would i be better off with the 60 stiff tipped, my ss is 107-110 but quick tran
[/quote]I'm not Joey, lol, but wouldn't you want to go with the 70x if the 60x was hooking (implying it was too soft for you) ?

[peakposition]

[quote name='gioguy21' timestamp='1409749994' post='10055603']
would be very interested to see how the spin #'s are in a rogue 60g series X flex shaft versus my UST Chrome 6F5T shaft...
[/quote]
[quote name='gioguy21' timestamp='1409855794' post='10064761']
comparison between the Rogue and Chrome?
[/quote]

would be intrested too in a comparison between chrome and rogue

[joey3108]

[quote name='tyorke1' timestamp='1412895978' post='10262753']
joey, i hooked the 60x , would i be better off with the 60 stiff tipped, my ss is 107-110 but quick tran
[/quote] Not that simple imo! I would need to see your whole swing on why you are hooking it and try a few specs set up. Get fitted from a fitter who don't go base on lm numbers only and yet he understand what proper swing mechanics is should be, then you'll see it clearer...

Joe

[Yarra]

Some Asian Tour player passed me one of these in 50X, but they do not have that "Made in USA' and other stuffs etched on the shaft. Are these real? I mean, being from tour, they can't be fake. Can they?

[jus]

Tour versions don't have same etchings as retail. 50TX was tour only from what I understand. Is yours X or TX?

[Yarra]

[quote name='jus' timestamp='1417213812' post='10515049']
Tour versions don't have same etchings as retail. 50TX was tour only from what I understand. Is yours X or TX?
[/quote]

50TX... Thank you so much for your clarification. Appreciate it.

[Texsport]

Has anyone hit the Tour Rogue 50TX?

Higher launch?

Hook prone?

Texsport

[leftypga]

Anyone have specs on the Rogue Black 110 70 gram in an X? Can't find anything on it.

[Holy Moses]

What is the MSI for other high end shafts? I know the OP said 35-65, but what about Graphite Design or MRC or Fujikura?

[storm3]

[quote name='Holy Moses' timestamp='1419969635' post='10661371']
What is the MSI for other high end shafts? I know the OP said 35-65, but what about Graphite Design or MRC or Fujikura?
[/quote]

[size=4]See post 37 by shafted in this thread. [/size]

[size=4]Keep in mind that these shafts do not use the high MSI fiber for the entire length of the shaft. It is more than likely only used for a single layup layer in the butt and tip areas (like the multi axis weave materials that companies were hyping up in years past). [/size]

[ThunderBuzzworth]

So... based on the ton material used you could find out the msi simply by multiplying the ton by 1.388? Is this accurate?

40t~ 55 msi
50t~ 70 msi
60t~ 85 msi
70t~ 95 msi
80t~ 110 msi
90t~ 125 msi

[bjno1300]

Pm sent joe.

Cheers

[Holy Moses]

How does the 125 play compared to the 110? A tad stiffer, longer, lower, with better dispersion? Anything else stand out?

[2zlinks]

Do all new Rogue 125's come with a certificate of authenticity? Or should I say should they if they are authentic, anyone know? Thanks

[boycer]

[quote name='2zlinks' timestamp='1420174141' post='10673077']
Do all new Rogue 125's come with a certificate of authenticity? Or should I say should they if they are authentic, anyone know? Thanks
[/quote]

Mine did.

[joey3108]

Fyi I spoted something new or at least a prototype.

I will post more info and picture when I have it in my hands.

I'm such a teaser ha! :-)

Note: Through fitting experiences on 125msi...the right flex choice to match your loading factor = most effective ball speed. We are talking increase of 4-6 mph.

[joey3108]

[quote name='2zlinks' timestamp='1420174141' post='10673077']
Do all new Rogue 125's come with a certificate of authenticity? Or should I say should they if they are authentic, anyone know? Thanks
[/quote] yes, it should come with it!

[joey3108]

[quote name='Holy Moses' timestamp='1420157088' post='10671837']
How does the 125 play compared to the 110? A tad stiffer, longer, lower, with better dispersion? Anything else stand out?
[/quote] Now I have enough experience with them, I would say the tour limited has a tighter feel at impact and lower ball flight a bit (I can see flatter trajectory, Cuz of lower spins) and biggest of all is the feel of the kick through the ball is more pronounce imo.

My 2 pennies!

[ram01002]

Joey -

Are these butt soft, tip stiff, like a whiteboard? I couldn't quite tell what the profile is when I have hit it.

Thanks.

[joey3108]

[quote name='ram01002' timestamp='1421256912' post='10745655']
Joey -

Are these butt soft, tip stiff, like a whiteboard? I couldn't quite tell what the profile is when I have hit it.

Thanks.
[/quote]Should be tip and butt stiff.

[ram01002]

[quote name='joey3108' timestamp='1421258842' post='10745903']
[quote name='ram01002' timestamp='1421256912' post='10745655']
Joey -

Are these butt soft, tip stiff, like a whiteboard? I couldn't quite tell what the profile is when I have hit it.

Thanks.
[/quote]Should be tip and butt stiff.
[/quote]

Thanks

[swizbeatz]

Is there a "stiff" 125 version or just X and TX?

[Dscvrr St Louis]

[quote name='swizbeatz' timestamp='1421259788' post='10745977']
Is there a "stiff" 125 version or just X and TX?
[/quote]

Real Tour Version is TR, TS, and TX only in 60 series and TS TX only in 70 series. As shown on Aldila website.