G-MEN UNITE

[ldh692002]

G man convert check the sig complete bag overhaul!!!!

Pics to follow!

[sniper]

Has anyone seen the new G irons? Local shop told me they are slimed down.

[sumo101]

[quote name='sniper' timestamp='1446948487' post='12567926']
Has anyone seen the new G irons? Local shop told me they are slimed down.
[/quote]
Sniper - I do hope that's right - only just able to stay G-man after launch of new i series (they're so tempting )

[sumo101]

Hey - just noticed - even my avatar is a G-man

[chief523]

First glance at the name and I thought this was a New York Giants topic. I do love my G25 driver though.

[Tim Sherwood]

Had my 'new' G5 5-U and G15 4i over the range a couple of times now and I'm liking them. Smaller to look at than the G20''s I played as a rental set. Much prefer the G15 4i to my G20 hybrid too. Looks like I'll be staying as a (old school) G chap for a while.

[TheKidWba]

[quote name='ShortSticks' timestamp='1446038921' post='12517786']
[quote name='stdavis22' timestamp='1446037302' post='12517682']
Considering most of you have experience with the g25's, what if any effect would i see from using a cfs stiff? I have a chance at a really good deal on a whole set of g25's but ive never hit stiff shafts before.
[/quote]

The CFS shaft is a great shaft. Some say it plays a little soft, so I don't think you will have a problem loading them, but only you can determine that. Give them a shot, and if it doesn't work out you should be able to flip them without losing your shirt.
[/quote]

Ive always played DGS300s and hit them solid however i brought a set of G25s from the bay on the premise they were Stiff shaft (were in fact CFS SRs). My swing speed has always said Stiff shaft also but i thought i will have a hit with these at the range and i havent looked back since Consistency, Flight, Control are second to none and scores have been tumbling down to mid to high 70s.

[Nessism]

Just in case anyone is looking for a very cool set of G's...found a [url="http://www.ebay.com/itm/281860006527?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT"]very nice set of G10 50th Anniversary editions[/url] on ebay ending tomorrow. Real tumbled finish, machined grooves and made in USA. Classics!

[KjBowen]

[quote name='Nessism' timestamp='1448164888' post='12630062']
Just in case anyone is looking for a very cool set of G's...found a [url="http://www.ebay.com/itm/281860006527?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT"]very nice set of G10 50th Anniversary editions[/url] on ebay ending tomorrow. Real tumbled finish, machined grooves and made in USA. Classics!
[/quote]

Sweet find.. Why do they have to be regular flex dang it

[scottc25]

I lol'ed when I saw this review of the G30's on Global Golf:

[i]1[/i] out of [i]1[/i] people found this review helpful.
[b]Handicap:[/b] 0-5 [b]Plays Golf:[/b] I play more than once a week [b]Dexterity:[/b] Right Hand
I got **** for these and ordered them from Global Golf, yellow dot, graphite regular flex. I was unsatisfied with their performance. Clunky feeling, too low launch angle, could not get the ball up. I sold them. I went with a set of Taylormade SpeedBlades steel shafts and love them. So much better to launch. I know another golf friend who got rid of his G30s too after buying them. I would not recommend these G30s. rt


0-5 handicap and he can't get the G30s in the air???????

[e-man]

Does this make me an official g-man?

[ampeep]

Didn't look at this thread until now; I've been a G man for years.

K15 driver

G15 3-4h

G10 irons - have always liked how they looked. They replaced a set of Zings - my friends had harrassed me for years about their appearance.

[dedezelic]

Had G10 irons for the last few years and just got G30s for xmas.

[Tim Sherwood]

My current G bag - now with added G15 4 iron which has replaced a G20 23* hybrid.

[Nessism]

Pulled out my G's today for a quick round. Been using my i E1's lately and playing generally poor. Anyway, I struck the ball much better today. Hit a number of nice solid irons shots. It's about time. The G's are staying in the bag and the i's will be hitting BST as soon as I can get the photos together.

[Wooderson]

That noticeable Nessism?

[Nessism]

[quote name='Wooderson' timestamp='1451161093' post='12765844']
That noticeable Nessism?
[/quote]

I think so.

[ShortSticks]

[quote name='Nessism' timestamp='1451156984' post='12765680']
Pulled out my G's today for a quick round. Been using my i E1's lately and playing generally poor. Anyway, I struck the ball much better today. Hit a number of nice solid irons shots. It's about time. The G's are staying in the bag and the i's will be hitting BST as soon as I can get the photos together.
[/quote]

Welcome home.

[ShortSticks]

Welcome ALL G-MEN.

[sumo101]

Once a G-MAN.....

[Dan42nepa]

Dan from PA.. I use G30 irons with xp95 shafts a G15 driver with senior shaft and G20 5Wood with a regular shaft and a b65 heavy putter.. My second set is G20 irons with the cfs regular shafts 5-pw with anser 4 wood and spaulding tp mills 9 putter.

[Milfordlefty]

Just pulled trigger on G20, 4-SW, TFC 169i graphite, blue dot. Had my first fitting last Saturday to firm up lie and length. Now I just need to be patient waiting for UPS

[dciccoritti]

Once a G-MAN.....

 

I'm speechless!!

[Nessism]

Once a G-MAN.....

 

I'm speechless!!

 

Almost a royal flush...except for that Odyssey putter. :dntknw:

[pistol4444]

G25 4-g green dot

G25 driver PL stiff 10.5

G25 3-wood

1959 putter

 

Nickname "the robot" lol

 

 

[sumo101]

I

Once a G-MAN.....

 

I'm speechless!!

 

Almost a royal flush...except for that Odyssey putter. :dntknw:

 

It's playing havoc with my OCD................

[Nessism]

I

Once a G-MAN.....

 

I'm speechless!!

 

Almost a royal flush...except for that Odyssey putter. :dntknw:

 

It's playing havoc with my OCD................

 

I'm playing an Odyssey V-line lately. I'm a huge fan of Ping putters, and have two different Anser's that move through the rotation, but Odyssey makes some fine putters that can be found for good prices. What you won't find in my bag, now or ever, is an Anser version putter made by anyone other than Ping. If someone gave me a Cameron 009 for free I'd take it straight to ebay and off the thing and then order up a real Ping Anser instead. :beach:

[Dayjobdave]

I play G25 irons, G30 Driver, Fairway woods and hybrids, and a Ketch putter, so I may qualify as a G man. :-)

 

I had a fitting check this am with my pro and he is encouraging me to change out my iron shafts from CFS Regular to AWT 2.0's in stiff.

 

He thinks i can keep the G25 heads and just upgrade the shafts, which I'm considering, but during the fitting I also hit G's and they are very nice.

 

Any opinions from someone who's hit both on whether i would notice much of a difference between the G25 and the G if i just give it up and go to the new heads?

 

David

[Nessism]

I play G25 irons, G30 Driver, Fairway woods and hybrids, and a Ketch putter, so I may qualify as a G man. :-)

 

I had a fitting check this am with my pro and he is encouraging me to change out my iron shafts from CFS Regular to AWT 2.0's in stiff.

 

He thinks i can keep the G25 heads and just upgrade the shafts, which I'm considering, but during the fitting I also hit G's and they are very nice.

 

Any opinions from someone who's hit both on whether i would notice much of a difference between the G25 and the G if i just give it up and go to the new heads?

 

David

 

The 25's are awesome. You won't gain much of anything by switching.

 

CFS shafts get lighter as the shafts get shorter. AWT is opposite. If you switch to AWT's the swingweights will need to be managed. The short iron swingweight will go up a couple points and the long iron swingweight will go down (which you can correct with tip weights). There are quite a few sets of low mileage AWT pulls on ebay so it would be a simple upgrade for you if you decide to pull the trigger.

[MattMo]

I play G25 irons, G30 Driver, Fairway woods and hybrids, and a Ketch putter, so I may qualify as a G man. :-)

 

I had a fitting check this am with my pro and he is encouraging me to change out my iron shafts from CFS Regular to AWT 2.0's in stiff.

 

He thinks i can keep the G25 heads and just upgrade the shafts, which I'm considering, but during the fitting I also hit G's and they are very nice.

 

Any opinions from someone who's hit both on whether i would notice much of a difference between the G25 and the G if i just give it up and go to the new heads?

 

David

 

I went from G25s to the new Gs, and now back to the G25s. I was getting 15-18 yards more with the Gs and a nice ball flight. However, I didn't like the feel and prefer the ferrule-less look of the 25s. They are just more confidence inspiring while addressing the ball, but that's just me.

A little surprised your fitter suggested going stiff in the AWT vs the regular in CFS (assuming you're properly fit for the regular CFS). I found the AWT to be a tad more stiff than the CFS and in hindsight would've dropped down a flex.