Mack Made Putter Review

[okiekev]

7 hours ago, PixlPutterman said:

Sent my Hudson down to Josie to have the flow neck swapped over to a plumbers, can't wait to get it back.

Dude can weld! I bet it turns out better than you’re expecting!

[jonradus]

14 hours ago, PixlPutterman said:

Sent my Hudson down to Josie to have the flow neck swapped over to a plumbers, can't wait to get it back.

His plumbers neck sets up really nice. You’re probably going to be really happy with it swapped out. 

[PixlPutterman]

6 hours ago, jonradus said:

His plumbers neck sets up really nice. You’re probably going to be really happy with it swapped out. 

I hope so, I've always been a plumber guy but went flow this time, se offset and toe hang as I normally do, but for some reason I just couldn't jive with it.

 

Good thing Josie is so great to work with, taking care of my craziness lol

[jonradus]

8 minutes ago, PixlPutterman said:

I hope so, I've always been a plumber guy but went flow this time, se offset and toe hang as I normally do, but for some reason I just couldn't jive with it.

 

Good thing Josie is so great to work with, taking care of my craziness lol

The PN Hudson wide I owned for a while set up so well. I had to move it along because it was a little too heavy, but man did that thing roll nicely and set up square as can be. 

[PixlPutterman]

3 hours ago, jonradus said:

The PN Hudson wide I owned for a while set up so well. I had to move it along because it was a little too heavy, but man did that thing roll nicely and set up square as can be. 

Mine is nice and light, had the bottom milled out

[rooski]

3 minutes ago, PixlPutterman said:

Mine is nice and light, had the bottom milled out

 

I don't know what it is about it, but I could look at the same three pictures of your putter every day and still enjoy the whole experience.

 

It's really just such a nice putter to look at every time.

 

I'm also a plumber's neck guy and always thought I would like to see your specific putter with a plumbers neck, excited I'll get the chance!

[PixlPutterman]

Just now, rooski said:

 

I don't know what it is about it, but I could look at the same three pictures of your putter every day and still enjoy the whole experience.

 

It's really just such a nice putter to look at every time.

 

I'm also a plumber's neck guy and always thought I would like to see your specific putter with a plumbers neck, excited I'll get the chance!

I honestly didn't go with a plumber from the get go as all the best pics on his IG had flow necks lol

 

I'm certain it will still look sick AND maybe I'll putt better with it 

 

I have a stability shaft waiting for it when it gets back, no excuses at that point lol

[jonradus]

6 hours ago, PixlPutterman said:

Mine is nice and light, had the bottom milled out

I wish I would have had him mill out the bottom like that. I’d probably still own it. Sweet stick.

[PixlPutterman]

5 hours ago, jonradus said:

I wish I would have had him mill out the bottom like that. I’d probably still own it. Sweet stick.

I wish he still made the head cover that you got with yours

[kb7]

So i got my putter in. I’m tired from a day of driving and shoveling snow, but I tossed on a grip and rolled a few on my mat. All I can say is “wow”. Every last detail is perfect. I’ll post more when I’m not so tired and actually can get some time to roll it, but for now here’s a picture of the sole engraving that was done. 
 

 

[PixlPutterman]

Had a plumbers neck swapped onto mine..... Should be here in a few days

[jonradus]

2 hours ago, PixlPutterman said:

Had a plumbers neck swapped onto mine..... Should be here in a few days

You’re going to love it. His plumbers neck sets up perfect on that piece. 

[mogc60]

My putter from Josie just shipped and I cannot say enough great things about him or his work. His communication is so good and he tries so hard to create exactly what you’re looking for. Coolest part…the minute he starts your putter, you are basically in his shop. Showing you all the design phase by text. Showing you pics of each step in your build. Double checking everything before he moves on. I will buy many more from Josie. I love the fact he can do anything basically and is willing to do so. I wanted the 3 course records I still hold on the sole. Josie came up with the Augusta leaderboard spin. Way creative and came out perfect. Being someone who doesn’t like an Anser head or a plumbers neck, some custom guys just aren’t for me. I’ve found my guy. Can’t wait for it to arrive. 

Edited January 31, 2022 by mogc60

[amolefty24]

Huge shout out to @josey. The dude is just a master with the welder! The original slant neck design was amazing but just wasn’t quite right. Fast forward and he helped out with plumbers neck mod. I definitely have a putter which will get into my bag as a gamer. 

Edited January 31, 2022 by amolefty24

[gents15]

17 hours ago, mogc60 said:

My putter from Josie just shipped and I cannot say enough great things about him or his work. His communication is so good and he tries so hard to create exactly what you’re looking for. Coolest part…the minute he starts your putter, you are basically in his shop. Showing you all the design phase by text. Showing you pics of each step in your build. Double checking everything before he moves on. I will buy many more from Josie. I love the fact he can do anything basically and is willing to do so. I wanted the 3 course records I still hold on the sole. Josie came up with the Augusta leaderboard spin. Way creative and came out perfect. Being someone who doesn’t like an Anser head or a plumbers neck, some custom guys just aren’t for me. I’ve found my guy. Can’t wait for it to arrive. 

I did the same course record thing as you with my putter. 

[jonradus]

3 hours ago, gents15 said:

I did the same course record thing as you with my putter. 

Haha. This is me setting my course record…

 

[PeanutsDaddy]

7 hours ago, gents15 said:

I did the same course record thing as you with my putter. 

You had me . . . Hook, line and sinker. 
 

Zoomed in to gaze at the dark abyss. That’s some fine milling : ) 

[MattM97]

48 minutes ago, PeanutsDaddy said:

You had me . . . Hook, line and sinker. 
 

Zoomed in to gaze at the dark abyss. That’s some fine milling : ) 

 

I was trying to figure out the joke too, now I got it. 

 

[PeanutsDaddy]

34 minutes ago, MattM97 said:

 

I was trying to figure out the joke too, now I got it. 

 

We’ve been cooped up too long Matt.

[MattM97]

2 minutes ago, PeanutsDaddy said:

We’ve been cooped up too long Matt.

 

Lockdown ended today for us in Ontario. Now just the remainder of winter to get through. At least it's not dark at 4pm anymore. 

[mogc60]

17 hours ago, gents15 said:

I did the same course record thing as you with my putter. 

Well played sir…that’s hilarious 

[MattM97]

Looks like Josey will be a guest for the next podcast of On The Screws Golf. 

[Maroon_19]

On 1/30/2022 at 7:32 PM, mogc60 said:

My putter from Josie just shipped and I cannot say enough great things about him or his work. His communication is so good and he tries so hard to create exactly what you’re looking for. Coolest part…the minute he starts your putter, you are basically in his shop. Showing you all the design phase by text. Showing you pics of each step in your build. Double checking everything before he moves on. I will buy many more from Josie. I love the fact he can do anything basically and is willing to do so. I wanted the 3 course records I still hold on the sole. Josie came up with the Augusta leaderboard spin. Way creative and came out perfect. Being someone who doesn’t like an Anser head or a plumbers neck, some custom guys just aren’t for me. I’ve found my guy. Can’t wait for it to arrive. 

I am in love with this putter shape.  When it delivers, need to know toe hang (I know he can modify, but I need a face balanced putter), and feel.  Your putter is nasty!

[Weston003]

I also had a great experience working with Josie on my long neck blade. We collaborated on this Anser 2 style design, and it came out great!

 

He is very good at CAD work, and incredibly fast on edits. As of late, he has made some stellar designs, like the fat flange bullseye style above. 100% capable of your custom putter dream. Not enough good things to say about him.

 

 

[farundrpar]

2 hours ago, WestonMaughanGolf said:

I also had a great experience working with Josie on my long neck blade. We collaborated on this Anser 2 style design, and it came out great!

 

He is very good at CAD work, and incredibly fast on edits. As of late, he has made some stellar designs, like the fat flange bullseye style above. 100% capable of your custom putter dream. Not enough good things to say about him.

 

 

what is the face on this one? 

 

love seeing these come through - making me 'need' to reach out and start a discussion with Josie... 

[mogc60]

22 hours ago, Maroon_19 said:

I am in love with this putter shape.  When it delivers, need to know toe hang (I know he can modify, but I need a face balanced putter), and feel.  Your putter is nasty!

I asked him to get it to about 10* toe hang, so almost face balanced. I typically use a face balanced putter but I wanted to have a bit more swinging effect with this. He could easily have it face balanced. I saw this head on Instagram and ordered it the next day. I love the shape as well. It’s 1/4 shaft offset. 

[Weston003]

22 hours ago, farundrpar said:

what is the face on this one? 

 

love seeing these come through - making me 'need' to reach out and start a discussion with Josie... 

 

It's a smooth faced 303 stainless. I opted for no grooves to provide the most feedback possible. But I was definitely tempted by one of his other face designs.

[MattM97]

18 minutes ago, WestonMaughanGolf said:

 

It's a smooth faced 303 stainless. I opted for no grooves to provide the most feedback possible. But I was definitely tempted by one of his other face designs.

 

That 'faux insert' milling is pretty cool. His other faces definitely look nice but the feedback on a face like this is so hard to avoid. 

[kb7]

16 hours ago, WestonMaughanGolf said:

 

It's a smooth faced 303 stainless. I opted for no grooves to provide the most feedback possible. But I was definitely tempted by one of his other face designs.

 

This was exactly my dilemma. He does and can do so many cool face milling patterns and I wanted them all. I also love my smooth face Newport and wanted this one to be close to it. After having a chance to roll mine indoors for the past few weeks I can not imagine getting anything other than a smooth face.

 

[sweetcelery]

Just scrolled through this thread and checked out his IG. Amazing work from what I can tell. Any of you able to tell me how backed up he is on his builds? I just sent an email asking to be put on the waitlist. Thank in advance!