Warranty replacement

[TwistedSister]

PXG is sending me a warranty replacement for my 2021 0211 driver.  Since they do not have any 2021's left they are going to send me just the 2022 head.  I have the Evenflow CB shaft 50g.  The new model is 45.5" long.  Does anyone have this build?  What is the nominal swingweight?  My 2021 played 45.25". 

[AdamMH]

There's a 3g difference between the heads. 2021 was 206g and 2022 is 203g. Between the length change and weight change you're probably going to lose a point or so.

[TwistedSister]

I just weighed my 2021 Head with a 15G weight in it and it is 203G and a swing weight of D6.  If the 2022 is also 203G then the SW should be the same. 

[AdamMH]

19 minutes ago, TwistedSister said:

I just weighed my 2021 Head with a 15G weight in it and it is 203G and a swing weight of D6.  If the 2022 is also 203G then the SW should be the same. 

... that doesn't sound right.

Per one of my previous orders the 2021 0211 front weight is 10g from the factory. Head weight according their website at the time was 206g. If you weighed your head without an adapter you actually have a 211g head since the adapter weighs about 8g - so your driver is 5 grams over spec. This jives with what your current weight screw is.

Somebody chime in if I'm wrong, but I believe that means your new driver is going to come in several points lighter.

Edited November 2, 2022 by AdamMH

[TwistedSister]

There is only a back weight in the 0211 driver head.  And mine came with a 7.5G weight.  Was a mistake on their part. Should have been a 10.  But the head only with the 7.5G weight  weighs 196.  The 2022 model has NO removable weight.

Edited November 2, 2022 by TwistedSister

[AdamMH]

44 minutes ago, TwistedSister said:

There is only a back weight in the 0211 driver head.  And mine came with a 7.5G weight.  Was a mistake on their part. Should have been a 10.  But the head only with the 7.5G weight  weighs 196.  The 2022 model has NO removable weight.

Whoops - I did mean back weight, sorry. Regardless, it sounds like you'll need to break out the lead tape to match the new head to the old one.

For what it's worth I went through the same-ish process - they sent me the wrong club and upgraded me to the 2022 model. The rep sort of implied there were factory weighting options in 2.5g increments but I didn't pursue that since the club is supposed to be a gift for someone else who prefers lighter SW.

Edited November 2, 2022 by AdamMH

[TwistedSister]

Just received email from PXG.  The rep stated that stock Swing weight is only D1.  With it being 1/4" short of the new standard it looks like it will be D0.  What company makes a driver with a stock SW of D1 ???