Cobra King 3DP Tour

[TheOverratedPhotog]

17 minutes ago, IndyArcher said:

I was quoted a set WITH a gap wedge that is estimated to ship in a week. There was no mention that the gap would be delayed. 

The press releases say 21 March so they must have it wrong. They all indicated that all clubs were available at the same time

[TheMoneyShot]

7 minutes ago, TheOverratedPhotog said:

The press releases say 21 March so they must have it wrong. They all indicated that all clubs were available at the same time

Sounds like they are pushing them out early which is a good thing.

[ShakeyT]

Does anyone know if there's anywhere in the DFW that already has the 3DPs to demo?

[IndyArcher]

12 minutes ago, TheOverratedPhotog said:

The press releases say 21 March so they must have it wrong. They all indicated that all clubs were available at the same time

According to the Cobra website the clubs aren’t available yet, but just above us is a post with the clubs in a consumer’s hands, so I would say that the clubs are being made available to dealers before the Cobra website and other venues. There was certainly no delay in getting a quote from a dealer yesterday with an estimated shipping date of one week from order. 

[COmedic]

My lefty order of 5-GW was quoted to ship mid-March. Happy to wait, but would be thrilled if I see shipping notice earlier!

[is1ander]

18 hours ago, martymcfly said:

Cobra sent us the fitting heads by mistake, can grab a few comparison shots next to other irons and the 3D limited ones as well. Let me know what you want next to them 👌🏻 they are hands down the softest, best feeling irons I’ve ever hit. Better than the 3D limited, better than the 221 & zxi7s. 

 

Please post sole, face width and topline pics of them with ZXI7 and Blueprint S. Thanks!

[TiScape]

6 hours ago, martymcfly said:

Comparison next to the 3D limited and cb’s. 3dpTour has the matte shaft. Vs Cb’s in the last two photos 

Thanks for taking the time. They do look the same to me. But with some saying emphatically that they aren’t, I’d want to be 💯 sure before dropping $3k +. 

[TiScape]

1 hour ago, is1ander said:

 

Please post sole, face width and topline pics of them with ZXI7 and Blueprint S. Thanks!

You have Marty on the payroll now, nice. Sure you don’t want anything else while he’s at it?

 

🤣

[KnoxvilleReb]

7 hours ago, martymcfly said:

Comparison next to the 3D limited and cb’s. 3dpTour has the matte shaft. Vs Cb’s in the last two photos 

Have you noticed any performance differences between the two? The only thing holding me back on an order is it seems like the LIMIT3D's were semi low spin. I'm already a low spin player so worried about the fit there. I was hoping the new "tour" ones would spin a little more, but seems to be potentially the same iron. 

[TheMoneyShot]

7 minutes ago, TiScape said:

Thanks for taking the time. They do look the same to me. But with some saying emphatically that they aren’t, I’d want to be 💯 sure before dropping $3k +. 

To my eyes, it looks like the 3Dtours are maybe a little slimmer by a skosh but definitely nothing major.  Kudos to Cobra for making the full retail offering better looking than the LE version (imho). 

[norcaltrojan]

I wonder if they are waiting for the LIMIT3D to sell out before adding these to the website

[ARSM1932]

Thanks for the pics, would I be correct in saying that the 3DP Tours look very similar to the King Tours in size, both slightly larger than the King CBs?

[martymcfly]

4 hours ago, ARSM1932 said:

Thanks for the pics, would I be correct in saying that the 3DP Tours look very similar to the King Tours in size, both slightly larger than the King CBs?

Yes I’d say they are near identical. 

[martymcfly]

5 hours ago, KnoxvilleReb said:

Have you noticed any performance differences between the two? The only thing holding me back on an order is it seems like the LIMIT3D's were semi low spin. I'm already a low spin player so worried about the fit there. I was hoping the new "tour" ones would spin a little more, but seems to be potentially the same iron. 

I’ll have to do some more testing to provide numbers. Only going off looks and feel at this point.

[martymcfly]

6 hours ago, is1ander said:

 

Please post sole, face width and topline pics of them with ZXI7 and Blueprint S. Thanks!

Coming Monday! TGIF

[TheOverratedPhotog]

5 hours ago, KnoxvilleReb said:

Have you noticed any performance differences between the two? The only thing holding me back on an order is it seems like the LIMIT3D's were semi low spin. I'm already a low spin player so worried about the fit there. I was hoping the new "tour" ones would spin a little more, but seems to be potentially the same iron. 

The limit3d are slightly lower spin but not like a game improvement. I found using a pro v1x instead of a pro v1 gave me similar numbers. That said, the $ taper shafts provided by default with the Limit3d are also advertised as low spin shafts so a shaft change could also do the same. 
 

“The KBS $-Taper (pronounced “Money Taper”) is designed to give players that Tour feel with a “straighter and stronger ball flight” and low spin.”

[is1ander]

5 hours ago, TiScape said:

You have Marty on the payroll now, nice. Sure you don’t want anything else while he’s at it?

 

🤣

 

Donuts? 🤣🤣

[martymcfly]

1 hour ago, is1ander said:

 

Donuts? 🤣🤣

I can do that no problem 🫡

[TJ83]

I need to stop hanging out in this thread lol, I’ve only had my tm p7cbs for like 4 months tops and these are tempting 😅

[Yakhandicap]

The tech is just going to go down in unit cost. Particularly if the other manufacturers start getting into it. Exciting times. 

[tRy260m]

Also heard yesterday axiom is available at an upcharge.

 

waiting to hear back specifics to see which specific weight/flex they will be offering

 

tempted to order another set in 125x

[kbeach]

Cost prohibitive 

[DNice26]

24 minutes ago, kbeach said:

Cost prohibitive 

A GolfWRXer’s silly season warm up….

Edited January 25 by DNice26

[TheOverratedPhotog]

3 minutes ago, DNice26 said:

A GolfWRXer’s silly season warm up….

It’s 86 here in Australia. I don’t want it to get warmer

[ShakeyT]

I want give a heavy weight graphite shaft a shot when I get to hit these. The LIMITEDs have the MMT 125s as a stock option, so I'm guessing they will be available in the 3DPs. 

[TheOverratedPhotog]

12 minutes ago, ShakeyT said:

I want give a heavy weight graphite shaft a shot when I get to hit these. The LIMITEDs have the MMT 125s as a stock option, so I'm guessing they will be available in the 3DPs. 

My limited came with 120g $ taper shafts 

[ShakeyT]

3 minutes ago, TheOverratedPhotog said:

My limited came with 120g $ taper shafts 

I don't doubt that at all. I just know that now the the Cobra website has the MMTs & have multiple KBS & a couple of True Temper options that are no upcharge.

[TheOverratedPhotog]

I’m so tempted to try carbon fibre but the stock shafts are working so well I’m scared of spoiling it 😅

[BirdieBob]

With the use of 316 Stainless Steel these irons will look great for many years.  Had forged SS blades many years ago.

 

[TiScape]

It’s like the gold gods are telling me it’s meant to be!!! 😆