910h which shaft will play well in the wind?

brraaadddd · December 16, 2011

looking for a shaft to bring down the spin using a mft ahina X need something lower spin in the titleist options any suggestions?

MadGolfer76 · December 16, 2011

Project X Tour Issue.

Mat905s · December 16, 2011

[quote name='MadGolfer76' timestamp='1324086565' post='3950779']
Project X Tour Issue.
[/quote]

Second that!

256ctf · December 17, 2011

Project x

brraaadddd · December 17, 2011

tried a project x hc1 and it spun a lot for me is the hb6 that different? and is there any good low spin custom options?

bkends35 · December 17, 2011

Tour AD DI 105

Lefty1987 · December 17, 2011

Fuji 904HB or tip a proforce 104 by 1" for a 17*, 1.5" for 19* etc

bc1 · December 17, 2011

[quote name='brraaadddd' timestamp='1324086414' post='3950761']
looking for a shaft to bring down the spin using a mft ahina X need something lower spin in the titleist options any suggestions?
[/quote]

the project x tour issue is a great combo with the 910H. The head is kind of low launch (for a hybrid) and I have tested dozens of shafts in the 17 degree head, the PX is the best for me. The 904 hb was nice but low, and I am a high ball hitter. SS 120ish, but play the 6.0 flex(hd2 i think) due to feel. I play x in driver, but stiff in everything else. That combo is the best hybrid I have ever hit, and I have dozens of tour issue hybrids.

Bravo36 · December 18, 2011

Kiyoshi!

brraaadddd · December 19, 2011

[quote name='Bravo36' timestamp='1324264975' post='3958723']
Kiyoshi!
[/quote]
was looking at oban don't seem them as a option for titleist custom in a hybrid though..weird.

PaulBoy · December 19, 2011

[quote name='brraaadddd' timestamp='1324300484' post='3959591']
[quote name='Bravo36' timestamp='1324264975' post='3958723']
Kiyoshi!
[/quote]
was looking at oban don't seem them as a option for titleist custom in a hybrid though..weird.
[/quote]
Have used Kiyoshi & Devotion in driver 3w & 5w and they work great in the wind - Does the 910h have the shaft glued or does it use a sleeve? - Either way can't you buy a shaft & do what it requires to fit? - Oban told me a few weeks ago that they were working with all the 'main players' to have their shafts offered as custom fit options (I asked about this after seeing a Kiyoshi in R11 livery) but you might have to ask if the Oban you want is available?
Cheers ... Paul

Bravo36 · December 19, 2011

I have 2 new Kiyoshis shafted for the 910 with adapters if anyone is interested. They are made up for the 19* and 21*. PM me if interested. I'll probably put them on the BST after first of the year.

flaun · December 19, 2011

I've had a little different experience than some. I've been gaming the 910H with stock stiff Kai'li for a while. Demo'd the Ahina and the launch was too low for when I needed some longer carries. The Kai'li gives me the ability to move the ball both directions and go high or low when I need to. The only issue is that I would occasionally get a little loose and hit a pull-draw.

I had never hit a Project X Tour (6.0 flex), so I ordered one for it. It really tightened up my flight as I don't lose it left, but there have been some unexpected side effects. With the same swing, I cannot hit a bigger draw or cut with it, at most 10 yards. Also, the ball launches significantly higher than with the Kai'li. Odd given that the ProjX feels stiffer and heavier than the Kai'li. I can tell that it spins less though which works with the higher launch. It is a little shorter than the Kai'li as well. I'm still testing to see if the different playing characteristics work for me or not.